Every
100 Hours of Use or once yearly, whichever occurs first
1. Lubricate all lubrication points. Lubricate more frequently when
used in salt water.
2. Inspect and clean spark plugs.
3. Replace water separating fuel filter.
4. Replace compressor air intake filter.
5. Check corrosion control anodes. Check more frequently when used
in salt water.
6. Drain and replace gear case lubricant.
7. Lubricate splines on drive shaft. *
8. Check power trim fluid.
9. Inspect battery.
10. Check control cable adjustments. *
11. Remove engine deposits with Quicksilver Power Tune Engine Cleaner.
12. Check tightness of bolts, nuts, and other fasteners.
13. Replace water pump impeller (more often if overheating occurs
or reduced water pressure
is noted). *
* These items should be serviced by an authorized dealer
